How to connect to the router and apples computer
How to connect to the router and apple computer
Due to the development of the Internet, more and more users are using a router, most families use broadband telecommunications, there is a smart apple hi conversion signal telephone dial-up Internet access. So after the new router how to connect the router and apple hi, small makeup to introduce how routers and apple hi connection method.
The first step to the sideline, telephone, broadband separator, the line side of the apple hi DSL mouth - a router on the LAN port of apple hi, on the other side in the router's WAN port - computer (two lines are respectively inserted into the router LAN port).Note, if it's ADSL broadband, then calls to from broadband separator on special interface connection.
Adsl line, connected to the separator, separator end - apple hi line interface, apple hi LAN pin - the WAN interface of the router, the router LAN interface is connected to the computer network cable socket, LAN has a good to a, can connect multiple computers.
separator
See the connection diagram above, we know roughly the connection between the router and apple hi and computer order.Above in apple between hi and Internet also lacks a voice separator, also use telephone line is needed.The shunt is mainly the phone separated into two, a phone line to answer the phone, apple hit on another line.Then apple hi transmit the audio signal into the digital signal through the network cable to the router.The signal transmission through a router a different computer.The whole process is achieved.
Next to the router Settings: open the IE enter 192.168.1.1 or enter the router 192.168.0.1 - the username, password, the default is admin - broadband into control - web page Settings, input account and password (dial-up mode is set to: automatic, later turned on the power,s the router will automatically dial)
Due to the development of the Internet, more and more users are using a router, most families use broadband telecommunications, there is a smart apple hi conversion signal telephone dial-up Internet access. So after the new router how to connect the router and apple hi, small makeup to introduce how routers and apple hi connection method.
The first step to the sideline, telephone, broadband separator, the line side of the apple hi DSL mouth - a router on the LAN port of apple hi, on the other side in the router's WAN port - computer (two lines are respectively inserted into the router LAN port).Note, if it's ADSL broadband, then calls to from broadband separator on special interface connection.
Adsl line, connected to the separator, separator end - apple hi line interface, apple hi LAN pin - the WAN interface of the router, the router LAN interface is connected to the computer network cable socket, LAN has a good to a, can connect multiple computers.
separator
See the connection diagram above, we know roughly the connection between the router and apple hi and computer order.Above in apple between hi and Internet also lacks a voice separator, also use telephone line is needed.The shunt is mainly the phone separated into two, a phone line to answer the phone, apple hit on another line.Then apple hi transmit the audio signal into the digital signal through the network cable to the router.The signal transmission through a router a different computer.The whole process is achieved.
Next to the router Settings: open the IE enter 192.168.1.1 or enter the router 192.168.0.1 - the username, password, the default is admin - broadband into control - web page Settings, input account and password (dial-up mode is set to: automatic, later turned on the power,s the router will automatically dial)
How to connect to the router and apples computer
Reviewed by Unknown
on
2:07 AM
Rating:
Reviewed by Unknown
on
2:07 AM
Rating:
